Our first Double! Oh no! My Mini Baby Silicone Baby Unboxing

Reborn Baby Doll Comparison : 10+ year old Artist-Painted (by me) VS T...

Sculpt 8, polymer clay OOAK baby girl

 This tiny girl has  loads of character, lol.  I painted her with Genesis heat set paints, and I am really happy with the way her skin tone turned out.  I will never go back to blushing with chalk again.

Polymer clay OOAK baby

 I'm learning to sew and made her little onesie and skirt, attaching it to a crocheted bodice.

 Here whispy baby fine hair is mohair,and she has two tiny ponytails.  \

I added a few photos with my hand to show scale  She's about the size of my index finger.

Miniature OOAK baby sculpt

Miniature OOAK polymer clay baby with plastic canvas crib.

 I made the crib for the last doll, out of plastic canvas.

Ooak babies

I had fun making this one!  She has the best hands and feet out of any of my sculpts so far, but her ears are weird, lol.

Sculpt 7, Pouty girl in polymer clay

OOAK baby girl in polymer clay

 This is my latest attempt at sculpting, and my biggest baby doll yet (I still have to measure her).

OOAK baby girl, sculpey living baby

 I wanted to make a pouty faced toddler and this is what I came up with.  I made her eyes by hand, and they're a pretty green, but I ended up covering most of the whites as I sculpted.

OOAK pouty baby

 I made a scull for her first, out of tinfoil and polymer clay; baked it, added the eyes, baked it again so the eyes wouldn't move while I sculpted.  I think I'll do it again this way as it's the only way I can make sure the pupils are facing the same way, lol. 

 I ran out of the normal wire that I use to put loops in the limbs so they can be sewn to the body and the wire I used broke as soon as I pulled the sewing thread tight.  I had to saw off the end of all of the limbs and redo them.  I had to open another bar of clay, and even though I used the exact same brand and color, the  new clay was several shades darker so this poor baby has limbs that are darker on all of the ends. 

OOAK baby girl

I tried adding a layer of clay to her head so I could root it and it was a huge disaster.  Not only did the hair look awful, the extra clay distorted her poor head, so I had to use a big wig to cover it up.

 Thankfully, the wig does a great job of returning her head to normal proportions, especially after I trimmed it.  The wig suits her, too.  In my mind, she's about 2 years old.

 Her feet are so cute; these have to be the best feet I've made yet.  I love her little round toes, lol.

Peek a boo!

 Here she is showing off her discolored upper thighs while playing peek a boo, although her diaper (pull ups, lol!) and panties cover most of the worst of it.

 I really am going to have to learn how to sew as I'd like to be able to make some nice doll bodies, and clothes, too.  I love crocheting but it would be nice to be able to make some cute little onesies for the dolls.

All in all, I'm very happy with the way this one turned out.  Now she  just needs a name.

Sculpting baby dolls, 4, First human: It's a girl!

OOAK baby girl

This is my first baby human, and I'm so pleased with her .

Tiny Ooak baby girl

She's another tiny girl, and I really struggled with her facial features as I had to use a 5 times magnifying glass just to see what I was doing.  I should have bought more clay when it was on sale for half off, as I'm running out, and thus have to sculpt small, lol.

i

It took me more than 12 hours to sculpt her head.  I rushed on her arms and legs because I was so tired, and just wanted to get them done, but they still came out OK.  Not perfect by any means, but my camera still selects infant setting for her, lol.

Tomorrow I'll add more, but for now, I just wanted to get some photos of her new outfit, which I finished this evening.  Isn't it adorable?  She chose the colors herself ;-).

Good night!

Sculpting, doll 2, a fairy

Little Flower Fairy polymer clay, crochet, needle felt

 

I am having so much fun learning how to sculpt in polymer clay.  Meet my second creation, tentatively named Sparkles.

Polymer clay doll head 2

 For this doll, I sculpted a bit bigger than my first, and gave her exaggerated features because I'm learning how to do them.  Noses are very hard for me, lol.  I painted this doll with chalk and eyeshadow.  I love fairies and elves and think I will sculpt as many as possible, lol, hopefully improving with each one.

Polymer clay fairy

She was sculpted without molds, in Sculpey Living Baby clay.
 I did her head first, on an armature made of wire embedded in a tinfoil ball, then covered with tape.
Then I sculpted her hands and feet and placed them on an wire armature that i made myself. Then I sculpted her hands and feet again because I ruined them while putting them on the armature :-).

Armature for polymer clay doll

 I needle felted her a body, around the wire.  That was the easiest part of dollmaking, for me.  The wire armature gave me the most trouble.

Needle felted body for polymer clay doll

 She's very bendy and poseable, but with closed eyes her poses are limited.  I want to learn to do an open eyed doll next.

Needle felted armature for polymer clay doll

Poseable polymer clay doll without clothes

 She looks very comfy, doesn't she?  I am very happy with her, considering she's only my second try.

Crocheted outfit for polymer clay mini doll

 I glued on some mohair for her hair.  It's a bit of a mess. I've trimmed the bangs since these photos were taken and she looks nicer now.

I crocheted this cute outfit using embroidery floss instead of yarn, and gave her flower "wings". I didn't have enough of the light green, or I would have made most of the outfit in green, with only a bit of the orange.   I've ordered some crochet cotton in pretty colors and it should be in next week. I can't wait!

Polymer clay fairy asleep

I do like the vibrant oranges and yellows of the embroidery floss, even though they were my second choice for colors.  This little doll makes me smile.  My aunt loved her.

I am really excited about learning how to sculpt because it's allowing me to combine so many of the crafts I already do (needle felting and crochet, reborning (the painting).  I can even make some plastic canvas furniture for the dolls.

Thanks for taking a peek at my flower fairy.  Should I keep calling her Sparkles, or can you help me with a better name?

Take care!

Sculpting my first mini baby out of polymer clay

Boo boo baby with burned head

I was so pleased with the way my first sculpt looked, and then I baked her.  She still looked good, for my first time, but I noticed her nostrils had closed during baking. I decided to try to poke them open, and the wee nose fell off.  I had to build the nose up again, and rebake, and when I did ,the head color changed to orange instead of the lovely strawberries and cream of the limbs.

Crocheted outfit for tiny 3 inch baby doll

I crocheted this tiny outfit for her, and she's cute, but she could have been so much better had I not messed about with her nose.  Lesson learned; I shall not mess about with tiny baked noses again, lol.

Her little hands and feet were so hard to do; I had to use a magnifying glass to see them.

First sculpt with hair

 When I first started reborning, my first reborn was so ugly I named him Frankie, short for Frankenstein's baby.  I rooted Frankie with Mac's (my standard poodle) hair, so wanted to give my first sculpt Mac's hair as well. I tried but the glue looked too messy so I pulled it off.  Her head's too tiny to think about rooting.

First polymer clay baby with needle felted bunny

 The little needle felted bunny is 4 inches long, and the littlepolymer doll is 3 inches long.  Her body and hat were made from the baby finger of a loofah glove.

Bunny doesn't want to share the teacup

I'm having fun learning how to sculpt, but it's very frustrating as well.  I'm working on a little elf child today.  I am planning to do it on a wire armature, with polymer clay head, feet, and hands. I have the head and feet done and was almost finished the hands when I ruined them by putting them on the armature.  I'll have to try again later.  I plan to needle felt a body around the wire, then crochet an elf outfit for him/her.

Sculpting a mini baby out of polymer clay

I am so excited!  I am finally learning how to sculpt babies out of polymer clay!  Here's my first shot;the baby parts are in the oven here.  I did the torso as practice; I'm planning on using the head and limbs with a soft body, probably a crocheted one.

Sculpting a mini baby in polymer clay,  for the first time

I had a lot of fun working doing this little guy, but it was also very frustrating because the clay kept getting so  hot in my hands that it was melting, lol.  A new sculpting friend from facebook gave me some good pointers; to put the clay in the fridge for awhile, or roll it between white paper to leach out the extra oils.  I tried the fridge and it worked so I didn't bother leaching the clay but will do so next time.

mini baby in polymer clay, parts in oven

The other problem I ran into was sculpting in such a tiny size.  My eyesight isn't great, and I wear glasses.  I couldn't see what I was doing on this doll's features until I borrowed my Dad's reading glasses, and then I could only see if I held the clay an inch away from my face, lol.

Tiny polymer clay baby bum, lol

Here's a shot of the little torso, with it's cute little baby bottom, in my hand  The torso is the same size as two joints on my baby finger, so very tiny. The head is even smaller.

Putting polymer clay baby doll parts in oven

Smoothing the head

 Here's the head, next to my finger tip, for scale. It's sitting on a toothpick.  I had to sculpt this head twice because the first time, it fell off the toothpick and splatted on the floor after I had it the way I liked it, lol.  Live and learn :-).

Cute little elf or fairy head

From this angle you can see his features.  I really like his cute little face, and was really surprised that I could get it the way I wanted my first time.  I was thinking I'd like the nose a bit smaller but it grew on me, so I'll probably leave it as is. It's really hard to get nice shots of such a tiny head. 

I ran out today to get an oven thermometer because my toaster oven wasn't getting hot enough when I set it at 275.  After I came home with the thermometer, I found out why; my oven, set at 275, only really heats up to 100 F!  I had to set it at just under 400 to get 275.  The baby is rebaking now.  I put some foil over him so the smaller parts won't burn.  I hope it works; I'd hate to ruin them. The little arms and lets are sooo tiny.

I also bought a hands free magnifying glass while I was out. I can't wait to try it!  Polymer clay was on for half price so I bought more clay as well.  My friend Albert wants me to try to make Smaug the dragon from Lord of the rings. That should be fun!

I can't wait to try to paint this baby.  I sure wish I had my genesis heat set paints and all of my good artist brushes, but they're in storage, along with my good convection oven and oven thermometer.  This is so addictive, and since I can't reborn here, I'm glad I'll still be able to get my baby fix!

Have a great day!